VideoSecu Tilt TV Wall Mount for Most 37"- 70" LCD LED Plasma TV Flat Screen with VESA 200x200 to 700x400mm, Sturdy Steel Wall Plate Free 10ft HDMI Cable and Bubble Level 3KR Discount !!

VideoSecu Tilt TV Wall Mount for Most 37"- 70" LCD LED Plasma TV Flat Screen with VESA 200x200 to 700x400mm, Sturdy Steel Wall Plate Free 10ft HDMI Cable and Bubble Level 3KR
The VideoSecu TV Mount is compatible with LED, LCD, and Plasma TVs and other flat panel display between 37 and 70 inches weigh less than 165lbs. Supports all VESA mounting standards 700x400, 684x300, 600x400, 600x300, 600x200, 500x300, 400x400, 400x300, 400x200, 300x300, 300x200, 200x200, 200x100 mm. Over 12 lbs solid heavy-gauge steel construction offers a smooth surface, high-tech look while providing strength and durability. Viewing angle can be adjusted by tilt 0-15 degree forward. TV is positioned just 2.2" profile from the wall for a clean, low-profile appearance. Lift and lock safety system secure the display in position as needed. How to ensure the mount compliance with your selected display? First, the weight of your display should be less than 165lbs. Second, mounting holes distance on the rear of TV must be less than 28" (700mm) horizontally and 16" (400mm) vertically. Last, the mount plate width is 32". Your TV should be at least 37". Otherwise, you will see the bracket. Note: VideoSecu brand mount, please report to Amazon.com if you receive a mount without VideoSecu logo.

Features :

• Fits most 37" 40" 42" 46" 47" 50" 52" 55" 58" 60" 62" 63" 65" 70" flat panel screens; VESA compatible up to VESA700x400
• Supports screens up to 165 lbs; Solid sturdy wall plate provides strength and durability
• Rail design allows TV to shift left and right for TV placement adjustment; Adjustable 15 degree of forward tilt
• Content: TV wall mount, 10 ft HDMI cable, Bubble Level, standard hardware pack and user manual; Assembly required.
• VideoSecu TV wall mount. Report to Amazon if received counterfeit mount not in VideoSecu box

List Price : $124.95
Price : $27.99
Saved Price : $96.96
Rating : 4.7
Review : Solid mount and a good bargain.
Mounted my Samsung 50" plasma using this mount. My display is about 70 pounds.

Installation was fairly simple. The back plate is 30 inches wide, so you will only be able to get 2 studs max. Important points:

1. It is very important to make sure the lag bolts drill into the studs.
2. The included hardware is iffy, so go spend the $5 at your local hardware store and get some better bolts.
3. The level on the back plate is not 100% accurate, so make sure to use your own.

The important thing to to measure where you want your holes and then measure them again and then make sure everything is level.

The construction of the mount and rails felt very sturdy.

For those that have never mounted a tv before there are 2 parts. A back plate that bolts on to your wall and then 2 rails that bolt onto the back of your display. You then place your display on the backplate. The rails have hooks to secure it onto the plate and then...